This hand-held guide is helpful for measuring and marking all sorts of stuff while you’re sewing. Measurements start at 1/8″ and go up from there. Use for marking seam allowance, appliqués, hexagons, hems, corners and much more.
Clear, plastic guide with black markings and a hang hole.
The Face Mask Template is a 3-in-1 template that makes a small, medium, or large sized mask. An instruction guide is included with the template. The Face Mask Template is a fast way to cut out shaped double layered face masks. Simply stack 2 coordinating fabric pieces; two times; (with right sides together) and cut around the template with a rotary cutter. We find that a 28mm cutter works best around the curves.
There will be a total of 4 pieces; an outer set and an inner set. This template also features pleat marks to give the mask a more custom fit after construction.
The template slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! It comes with fully illustrated step by step instructions or view a video demonstration.
Total Size - 6in x 6-1/4in
Creative Grids® products are made in the USA and sold through independent quilt shops as well as select online retailers.
This 6-1/2 inch square features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 inch and 1/4 inch increments.
Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.
Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable. Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks.
Add A Quarter Ruler 6 Inch
The Add-A-Quarter combines the speed of rotary cutting quilt pieces with the accuracy of using templates. Once your templates are made, the Add-A-Quarter will automatically add the customary 1/4" seam allowance to any straight angle and provide a straight edge for your rotary cutter.
This 1/2 x15 inch seam marking tool is long enough to mark the diagonal of a 10 inch square. Mark through the slotted center with any mechanical pencil and sew 1/4 inch on each side of the tool. Or mark the sewing line by drawing on both outside edges. Our exclusive grip holds the tool in place while marking. The perfect tool when making half-square triangles!
This 6-1/2 inch x 12-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 inch and 1/4 inch increments.
Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.
Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching. The ruler also features a 30degree/60degree angle.
White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
Scan the QR Code printed on the ruler to view a tutorial of these features.
Creative Grids Rulers have a MAP (Minimum Advertised Pricing) Policy. Please do not advertise them for less than the suggested retail.
This 8-1/2 inch square features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 inch and 1/4 inch increments.
Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.
Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable. Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks.
Collins 120 Inch Tape Measure. 120in fiberglass yellow tape measure. Inch and centimeter scales. Extra-large, easy-to-read numbers. Metal tips on ends. Will not tear, stretch, shrink or fade. Use to measure quilts for borders and backing. Also excellent for home decorating projects.
WARNING: This product is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information please visit www.p65warnings.ca.gov
This 3-1/2 inch square features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 inch and 1/4 inch increments.
Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.
Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable. Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks.
The Clammy 8in is an innovative multi function template that can be used to cut 8in clamshells, circles, half circles, quarter circles, and orange peel shapes! This is the "new and improved" Clammy 8in which now includes registration marks right on the template for easy transfer to your shapes.
Meet Elvira, your new favorite curvy ruler! She not only looks beautiful, she’s quite handy when quilting wavy lines or continuous curve lines. Elvira can quilt multiple arcs in multiple directions without rotating your quilt (or working from the back of your foot)!
Use her for:
- Quilting continuous curve blocks (2in squares are her specialty!) - Adding a series of curves along a row of blocks
- Quilting all sides of a square, no matter what foot you use!
Features:
- Creative Grids Grip ensures the tool doesn’t slip while quilting.
- Black and white dashed guide lines are visible on all fabric colors. - Shape allows you to keep control, helping prevent broken needles and crooked lines.
- Made with 1/4in thick high-grade acrylic that is perfect for both longarm and home sewing machines.
Total Size - 2-3/4in x 7-1/4in
Amanda Murphy's Longarm Quilting Templates feature a special nonslip back and clear marking in two colors. With generous surface area, you'll find then easier to hold. Their design makes them easy to read and makes fabric simple to cut! The Long Arm Every Ribbon Rulers Set 2 set of 3 different sized rulers gives you creative freedom. These 3-1/2 in, 4-1/2 in, and 5-1/2 inrulers are the in-between sizes of the original Ribbon Candy Set. Quilt Ribbon Candy borders and Ribbon Candy fill will be fast and easy. The possibilities are endless! Lower those feed dogs and get quilting!
Amanda Murphy's Longarm Quilting Templates feature a special nonslip back and clear marking in two colors. With generous surface area, you'll find then easier to hold. Their design makes them easy to read and makes fabric simple to cut! The LongArm Every Lollipop set of five rulers gives you creative freedom. With 5 different shapes, quilting a lollipop column, lollipop fill, or a lollipop medallion will be fast and easy. The possibilities are endless! Lower those feed dogs and get quilting!
Cut 30 and 60 degree angles up to a finished height of 12in. This 60 degree equilateral triangle features easy to read black and white markings. A 1/4in dashed line is printed on each side of the center vertical line so you can cut 30 degree triangles that include the seam allowance.
The ruler comes with fully illustrated step by step instructions or scan the QR Code printed on the ruler to view a video demonstration of these features.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
Total Size - 12-1/2in x 14-3/4in
This 1/2 x 9 inch seam marking tool is long enough to mark the diagonal of a 6-1/2 inch square. Mark through the slotted center with any mechanical pencil and sew 1/4 inch on each side of the tool. Or mark the sewing line by drawing on both outside edges. Our exclusive grip holds the tool in place while marking. The perfect tool when making half-square triangles!
Dritz 120 Inch Tape Measure. 120in fiberglass yellow tape measure. Inch and centimeter scales. Extra-large, easy-to-read numbers. Metal tips on ends. Will not tear, stretch, shrink or fade. Use to measure quilts for borders and backing. Also excellent for home decorating projects.
This 4-1/2 inch square is the perfect companion for anyone who loves to work with the 5 inch pre-cuts on the market.
The diagonal line makes trimming half-square triangles created with these 5 inch squares a piece of cake. It features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 inch and ¼ inch increments.
Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.
Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
Sew together 24 of these 15 degree triangles to create a complete circle; 12 to create a half-circle; or 6 to create a quarter-circle. Create Fans, Dresden Plates, etc. up to a finished size of 18 inches.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
Total Size - 3in x 9-1/2in
This 4-1/2 inch x 8-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 inch and 1/4 inch increments.
Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.
Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching. The ruler also features a 30degree/60degree angle.
White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders.
Scan the QR Code printed on the ruler to view a tutorial of these features.
Use the Kites Plus ruler to cut and sew kites up to a finished size of 8 inches. These 60 and 120 degree angles combine with hexies, half hexies, 60 and 120 degree triangles for limitless design potential.
Follow the markings on the ruler to cut the top and side triangles. Line up these odd angles perfectly by marking the seam allowance through the holes in the ruler. Or, cut the kite on the fold to create a mountain peak shape.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
It comes with fully illustrated step by step instructions or scan the QR Code printed on the ruler to view a video demonstration.
The Straight Out of Line ruler creates unique four-patch blocks with the illusion of curves. Ruler markings make it possible to cut squares from 4 – 10 inch squares – and every half-inch in between. The finished size of the pieced blocks is approximately 3/4 inch less than the cut block.
It comes with fully illustrated step by step instructions or scan the QR Code printed on the ruler to view a video demonstration. Creative Grids Rulers have a MAP (Minimum Advertised Pricing) Policy.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
Total Size - 6in x 24in
Our patent-pending Slit 'N Sew method represents a truly revolutionary improvement by allowing piecing to be done quickly and easily each and every time! Using the CutRite Slit 'N Sew templates, simply use a rotary cutter to make small cuts that are precisely located on the templates. Then proceeding a slit at a time, line up the next slit from each piece that is being pieced together and sew to that slit. Ideally sized to work with standard pre-cuts, such as 5" and 10" squares.
Our patent-pending Slit 'N Sew method represents a truly revolutionary improvement by allowing piecing to be done quickly and easily each and every time! Using the CutRite Slit 'N Sew templates, simply use a rotary cutter to make small cuts that are precisely located on the templates. Then proceeding a slit at a time, line up the next slit from each piece that is being pieced together and sew to that slit. Ideally sized to work with standard pre-cuts, such as 5" and 10" squares.
Measure, mark, fold, press: deep hems, long hems, miter corners and home decor. Heat resistant, press directly on the ruler. Can be used with dry or steam iron. Unique non-slip surface holds fabric in place for precise results. Size: 4 x 14 in How to Use: Fold fabric over ruler, match edge to size needed, press Fold corner to match miter line, press Use ruler to mark hem size, place ruler at mark, fold fabric and press