DESCRIPTION
Make Folded Corners quickly and accurately with the Creative Grids® Folded Corner Clipper! No need to draw pencil lines! Since you have to trim the corner anyway, why not trim it first, and use the raw edge as your seam guide? AND... Since the corner was trimmed with a straight edge, your bonus triangle is ready to sew into a Half-Square-Triangle Block! Or, use the 45 degree angle to create binding or mitered corners.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! The Folded Corner Clipper comes with fully illustrated step by step instructions or view a video demonstration.
Total Size - 5in x 5in
The Half Rectangle Trim Tool from Creative Grids® makes half rectangle units in seven different sizes. Make the half rectangle units with either a right or left slanting seam. Cutting chart is printed right on the tool, along with trim lines for perfect half rectangle units every time. A & B trims make it easy to line up the triangles for sewing. Since half rectangles have a different angle than half square triangles, an extra 1/8in indent is added in the final trimming so that when sewn into a project, the seam lines will go corner to corner. • Easy to read black and white markings. • Cutting chart printed right on the tool. • Create seven different sizes of half rectangle units that range from 1in x 2in to 4in x 8in finished sized. • Comes with fully illustrated step by step instructions. • Scan the QR Code printed on the tool to view a how-to video of these features and to see the projects that can be made with this tool. • The Half Rectangle Tool slides easily over the fabric until pressure is applied. Then our exclusive grip holds the fabric in place while cutting, eliminating slipping and miss-cuts. • Size: 8-1/2in x 10-1/2in
Very fast, easy and accurate! Make four Flying Geese units at one time - the printed cutting chart on the ruler works for TWO different methods! Or, oversize your favorite method for making Flying Geese, then use the Ultimate Flying Geese Tool to trim to perfection. Create eight different finished sizes from 1 x 2 to 4 x 8 inches - the cutting requirements for each size is printed right on the tool! Or, use your favorite method to create over-sized units... then trim them down to perfection. The tool slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! It comes with fully illustrated step by step instructions or scan the QR Code printed on the tool to view a video demonstration. • Size: 8-1/2in x 10-1/2in
Cut a variety of popular shapes from precut 10" squares or from your stash with this new Creative Grids Ruler from It's Sew Emma | Easy to read black and white numbers. | Cut around the square to create your own 10" squares from your stash. | 1/4" grid covers the entire square. | 2-1/2", 5" squares and strips, and 9-1/2" squares are highlighted. | 45 degree line makes quick work of trimming half-square triangle blocks. | Comes with fully illustrated step by step instructions. | Scan the QR Code printed on the instructions to view a how-to video of these features and to see the patterns that can be made with this ruler. | Ruler slides easily over the fabric until pressure is applied. Then our exclusive grip holds the fabric in place while cutting, eliminating slipping and miss-cuts. | Total Size – 10" x 10"
Bloc Loc’s Half-Rectangle Triangle 3:1 Mini Set contains two multiple-sized rulers 2″ x 5″. Each ruler is a mirror image of the other and the groove locks onto the seam for control and perfect trimming every time. Rulers can trim in 1/8″ increments which allows a wider range of blocks available to quilters.
Bloc Loc’s Flying Geese #7 set contains all three of your favorite rulers; 1 1/2″ x 3″, 2″ x 4″, 3″ x 6″. Trims units to 2″ x 3 1/2″, 2 1/2″ x 4 1/2″ and 3 1/2″ x 6 1/2″. Groove technology locks onto seams for total control–there’s no rocking and seams go where they should. Trims flying geese and square in a square units quickly, easily and best of all, they’re fun! | Contains 3 Rulers
Bloc Loc’s Flying Geese Set #1 contains 1 1/2″ x 3″, 2″ x 4″, 3″ x 6″, 4″ x 8″ rulers that lock onto the seam allowance for instant ruler placement, total control so that the seams end in each corner and trims the correct amount across the tip. Ruler rock is gone, too. Once a unit is completed and trimmed, it will measure 2″ x 3 1/2″, 2 1/2″ x 4 1/2″, 3 1/2″ x 6 1/2″ or 4 1/2″ x 8 1/2″. Trims full and partial flying geese, parallelograms, square in a square and many, many other versions of flying geese units. | Contains 4 Rulers
Bloc Loc’s Half-Square Triangle Set #5 contains 4 1/2″, 5 1/2″ & 6 1/2″ rulers that lock onto the seam for instant ruler placement, control so that the seam ends in each corner and trims 90% faster than a flat ruler. Ruler rock is gone, too! Also trims quarter-square triangles, birds in the air, y-blocks, LeMoyne Star, double windmill, hidden square units and much, much more. HST rulers are multi-sized and trim in 1/8″ increments. | Contains 3 Rulers: 4.5", 5.5", and 6.5"
Our patent-pending Slit 'N Sew method represents a truly revolutionary improvement by allowing piecing to be done quickly and easily each and every time! Using the CutRite Slit 'N Sew templates, simply use a rotary cutter to make small cuts that are precisely located on the templates. Then proceeding a slit at a time, line up the next slit from each piece that is being pieced together and sew to that slit. Ideally sized to work with standard pre-cuts, such as 5" and 10" squares.
Our patent-pending Slit 'N Sew method represents a truly revolutionary improvement by allowing piecing to be done quickly and easily each and every time! Using the CutRite Slit 'N Sew templates, simply use a rotary cutter to make small cuts that are precisely located on the templates. Then proceeding a slit at a time, line up the next slit from each piece that is being pieced together and sew to that slit. Ideally sized to work with standard pre-cuts, such as 5" and 10" squares.
Introducing the first truly left-handed square ruler on the market! Now you can experience all of the great features of the most popular Creative Grids ruler, but printed specifically for lefties!
The markings on this 6 1/2 inch square are a mirror image of our right-handed ruler so lefties will no longer have to deal with numbers that are upside down and reversed! This 6-1/2 square ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches.
The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature — designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides — to add the 1/2 inch seam allowance. A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable. Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a tutorial of these features.
Total Size - 6-1/2in x 6-1/2in
Creative Grids® products are made in the USA and sold through independent quilt shops as well as select online retailers.
Traction Tape allows you to make any ruler or temlate non slip! Easily applied to the back of any ruler, Traction Tape eliminates slipping and sliding. Just a small amount on your rulers give you a much more accurate and safer cut. 1" x 35" long, cleans with warm water.
Shelly is your new quilting best friend! Efficient and beautiful quilting is her specialty.
Features:
Creative Grids® Grip prevents slipping
Black and white dashed guide lines are visible on all fabric colors
Designed to fit in the palm of your hand, it is easy to manipulate and control
Curved edges allow for versatile designs.
Use Shelley to quilt clamshell designs from either side of the tool - no need to rotate the quilt since you can quilt from any side of the quilting foot. The Clamshell design can be classically quilted for an open traditional feel, or given a modern update by flipping it around to create orange peels. But that's not all she does! Use Shelly for: quilting clamshells or orange peels; rotate to create beautiful flower motifs, arcs, and leaves. It is 1/4 inch thick so it works for domestic as well as longarm machines. To learn more, view a video demonstration.
Total Size - 4-1/2in x 5-1/4in
